Jinhua Highviz Imp. & Exp. Co., Ltd.  

Product Name: Safety Warning Tape for Reflective Fashion Clothing Model NO.: 4001-ZX Color: Silver Application: Safety Clothing Material: Pes Reflective Material Type: Reflective Fabric Retro-Reflection: >500CD/(Lx M2) Dry Clean: 5circles (ISO 3175) Shipping Port: Ningbo/Shanghai Trademark: HIGHVIZ Transport Package: 100m/Roll Specification: 5cm Origin: China HS Code: 3920590000 Product Description 4001-ZX: Silver Plotter Cutting Reflective Transfer Film with AdhesiveHIGHVIZ 4001-ZX Silver Plotter Cutting Reflective Transfer Film,Composed of micro glass beads bonded to heat activated adhesive, with a transparent PETcoverto protect the reflective side during application and ensure strong adhesion while Peeling offthe cutting designs.HIGHVIZ 4001-ZX Reflective Transfer Film can be plotter cutting or lasercuttinginto graphics, characters and LOGOsas per customers' requirements, thenheat applied to occupational apparel,work wear, sportswear, schooluniforms as well as different substrates to meet variousfashionrequirements. HIGHVIZ 4001-ZX Reflective Transfer Film makes people visible in darkness, fogand rainingweather to decrease dangers, also work as an elementin thefashion industry.PhysicalPerformance: CertificateEN ISO 20471:2013 ANSI/ISEA 107:2010 AS/NZS 1906 OKEO-TEX 100Retro-reflection>500cd/(lx M2)WashDomestic Wash≥50 cycles@60°C (ISO 6330)Dry Clean≥5circles (ISO 3175)Spec2.5cm*100M/Roll,5.0cm*100m/Roll, other size upon request.ApplicationIdeal for High Visibility Work Wear, Protective Uniforms, Sportswear, School Uniforms ,Fashion Wear, Fashion Bags and so on.Retro-reflection Performance: Initial coefficient of retro-reflection performance in cd/(lx M2) 4001-ZX: Silver Reflective Transfer film, PESBackingObservationAngle Entrance Angle 5° 20° 30° 40°TestCertificateTestCertificateTestCertificateTestCertificate 0.2°523≥330537≥290476≥180274≥65 0.33°355 ≥250359≥200340≥170230≥60 1° 37≥2542≥1546≥1231≥10 1°30′ 20≥1020≥720≥521≥4Test Result of 4001 Silver ReflectiveTransfer film 1.1 AbrasionThe test sample shall be abraded in accordance with EN 530:1994, method 2, using the woolen fabric abradant. The specimens shall be measured after 5 000 cycles and at a pressure of 9 KPa.Retro-reflection after AbrasionEntrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5° 0.2° 449 100 PASS1.2 FlexingThe test sample shall be flexed in accordance with EN ISO 7854:1997 method A. The specimens shall be measured after 7 500 cycles.Retro-reflection after FlexingEntrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5° 0.2° 446 100 PASS1.3 Folding at cold temperaturesThe test sample shall be exposed and folded in accordance with ISO 4675 at a temperature of (-20 ± 1)°C.Measurements shall be made after reconditioning to the atmosphere for at least 2 h.Retro-reflection after Folding at cold temperaturesEntrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5° 0.2° 466 100 PASS1.4 Exposure to temperature variationSpecimens of the size of 180 mm x 30 mm shall be exposed continuously to a cycle of changing temperatures:a) for 12 h at (50 ± 2) °C immediately followed byb) 20 h at (-30 ± 2) °Cc) Conditioning for at least 2 h in accordance with 7.1.Retro-reflection after Temperature VariationEntrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5° 0.2° 479 100 PASS1.5 Wash, Dry Clean After 25 wash, washing procedure in accordance with ISO 6330:2000+A1:2009, method 2A, dried at (50 ± 5) °C. Entrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5° 0.2° 363 100 PASSAfter 50wash, washing procedure in accordance with ISO 6330:2000+A1:2009, method 2A, dried at (50 ± 5) °C. Entrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5° 0.2° 291 100 PASSAfter 50 cycleswashing, no Breakage, detachment, discoloration After 5 cycles dry washing, no Breakage, detachment, discoloration 1.6 Retro-reflective performance in rainfallSamples shall be tested in accordance with Annex D of this standard. Exposure at 284mm/h water flow for 2 hours. Retro-reflection after rainfallEntrance AngleObservation AngleMeasured value (cd/(lx M2))Minimum requirements (cd/(lx M2)) Result 5°12' 257 100 PASSThe above test data is from SGS and SATRA laboratory test of HIGHVIZ received samples, final production will have ±3-5% tolerance, which is acceptable.